Performans
|
Measurement Range |
-100 to +20°C dew point -110 to +20°C dew point |
Accuracy
|
±2°C dew point |
Response Time |
5 mins to T95 (dry to wet) |
Repeatability
|
0.5°C dew point
|
Calibration |
Traceable 7-point calibration certificate |
Elektriksel Özellikler
|
Output Signal
|
4-20 mA (2-wire connection, current source) User-configurable over range |
Output |
Dew point, moisture content in ppmV |
Analog Output Scaled Range
|
Dew point: -100 to +20°C Moisture content in gas: 0 - 3000 ppmV Non-standard available upon request |
Supply Voltage |
12 to 28 V DC |
Load Resistance
|
Max 250 Ω @ 12 V (500 Ω @ 24 V) |
Current Consumption
|
20 mA max |
CE Marked
|
Certified |
Çalışma Özellikleri
|
Operating Temperature |
-40 to +70°C |
Operating Pressure |
45 MPa (450 barg) maximum |
Overpressure Rating
|
x2 operating pressure 90 MPa (900 barg)
|
Flow Rate
|
1 to 5 Nl/min mounted in standard sampling block 0 to 10 m/sec direct insertion
|
Temperature Coefficient |
Temperature compensated across operating temperature range
|
Mekanik Özellikler
|
Ingress Protection Sensor
|
IP66 in accordance with standard BS EN 60529:1992 NEMA 4 in protection accordance with standard NEMA 250-2003 |
Hazardous Area Certificates
|
ATEX - II 1 G Ex ia IIC T4 (-20°C ≤ Ta ≤ +70°C) FM - IS / I / 1 / ABCD / T4 Ta = +70°C FM - IS / I / I / ABCD / T4 Ta = +70°C CSA - IS Class 1 Div 1 Groups ABCD T4 IECEx - Ex ia IIC T4 (-20°C ≤ Ta ≤ +70°C)
|
Housing Material |
316 Stainless steel
|
Dimensions |
L=132mm x Ø45mm (with connector) |
Filter (Sensor Protection) |
Standard: HDPE Guard <10μm Optional: 316 stainless steel sintered guard <80μm
|
Process Connection and Material
|
5/8"- 18 UNF Alternatives: G1/2" BSP or 3/4"- 16 UNF 316 stainless steel |
Weight |
150g
|
Interchangeability
|
Fully interchangeable transmitter
|
Electrical Connections |
Hirschmann GDS series (DIN 4350-C)
|
Durum
|
Diagnostic Conditions (Factory Programmed)
|
Sensor fault Under-range dew point Over-range dew point |
Approved Galvanic Isolators
|
KFD2-CR-EX1.20200 KFD2-CR-EX1.30200 KFD0-CS-EX1.50P KFD0-CS-EX2.50P
|
Çıkışlar
|
Diagnostic Conditions (Factory Programmed)
|
23 mA 4 mA 20 mA |
Approved Galvanic Isolators
|
KFD2-STC4-EX1.H MTL5041 MTL5040
|